Motorized Crimp Tester

Crimp Tester – Motorized with Output

Motorized wire crimp pull testers are designed to check the pull-off force values of electrical leads, crimped terminals and connectors and ensure consistent results by controlling force and speed. The system is configured with a motorized test stand and Imada DS2 or ZT series force gauge in the range of your choice and attachments. The cam grip or vise chuck are frequently used on the bottom of the tester. The WG-1, WG-2, WG-3 or KC-100 grip can be used on the top of the tester to suit your application. Data acquisition software is available as well as attachments for other applications.

WG-1 is perfect for pull testing crimp on terminals. Set the opening size by turning the wingnut until jaws contact sample, then back off a little until the sample slides into the jaws from the side. Then you can simply slide the next sample into the jaws when you are ready to test.

WG-2 grips the actual wire or sample tested with serrated jaws. Ideal for a variety of shapes.

WG-3 multi terminal grip has 12 wire gauge apertures on the turret. Locate the appropriate size, lock in position and you’re ready to test.

The KC-100 spring- loaded wedge grip is ideal for tensile measurements of thick materials (up to 10mm thick). The serrated jaw is 15mm wide.

Summary
Aggregate Rating
no rating based on 0 votes
Brand Name
Imada
Product Name
Motorized Crimp Tester

Motorized Crimp Testers

ModelMX-110MX2-110MX-275MX2-275MX2-550MX-1100
Capacity110 lbf110 lbf275 lbf275 lbf500 lbf1100 lbf
FeaturesAuto cycle and Force Control CapabilitySpeed Control, Hold Duration, Cycle CounterAuto cycle and Force Control CapabilitySpeed Control, Hold Duration, Cycle CounterSpeed Control, Hold Duration, Cycle CounterAuto cycle and Force Control Capability
Summary
Aggregate Rating
no rating based on 0 votes
Brand Name
Imada
Product Name
Motorized Crimp Tester
  • Force controlled non-destructive testing (destructive testing as well)
    -Maintain force between high/low setpoints
    -Increase force to high setpoint and stop
  • Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Wide speed range: 0.4 – 11.5 in/min (optional speed ranges available)
  • No programming required
  • Newton, lbf and kgf units are selectable
  • Accuracy: ±0.2% F.S. ±1 LSD
  • RS-232C, Digimatic and analog outputs
Summary
Aggregate Rating
no rating based on 0 votes
Brand Name
Imada
Product Name
Motorized Crimp Tester