CEDAR DIS-RL10 Digital Torque Screwdriver

Digital Torque Screwdriver / Tester

Standard Features

  • Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
  • Peak, Real Time, Peak Down and Continuous Output measuring modes (selectable)
  • Selectable units lbf-in, Kgf-cm, N-cm and N-m
  • USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
  • Statistics: number of data, Max, Min, Avg
  • CW, CCW ratchet and fixed operation
  • 800 data memory for recall or for SPC download
  • Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
  • Zero reset button on the driver for easy operation
  • Ergonomic, light weight, rugged metal construction
  • Runs on internal NiMH batteries (8 hour use)
  • DIS-RL10 includes 2-1/4″ Phillips tips, 3′ cable, AC charger and carrying case. Optional CW, CCW and fixed operation clutch available.
  • Optional CW, CCW and fixed operation clutch available.

Cedar DIS-RL10 Digital Torque Screwdriver / Tester is ergonomically designed, extremely lightweight and good for use as a production tool. The instrument can be used to tighten or loosen screws up to 90 lbf-in. The remote sensor design allows it to be used in difficult to reach places. The DIS-RL10 can be used to evaluate torque controlled screwdrivers by doing comparative tests on a given fastener. Both breakaway and loosening tests can be performed. DIS-RL10 substantially reduces scrap and rework costs by eliminating over and under-tightening of screws. It is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.

Unparalleled Accuracy

The Cedar DIS-RL10 Digital Torque Screwdriver has an accuracy of ±0.5%, ± 1 LSD. It offers programmable high and low setpoints for uniform tightening or Go/No Go testing. The DIS-RL10 has an 800 data memory for recall or for SPC download. The unit can also provide peak and continuous data for SPC (statistical process control) through the USB virtual COM port with the use of SW-1SV-USB Imada Torque Data Acquisition Software.

What’s Included?

Sold in kit form including display unit, screwdriver with 3′ cable, 2 Phillips bits, AC adapter/charger and carrying case. DIS-RL10 includes two 1/4″ Phillips tips.
All new gauges include a 3-point calibration certificate traceable to NIST. ISO-17025 certificates are available at an additional charge.

DIS-RL10 Digital Torque Screwdriver Ranges

Accuracy: ±0.5% F.S. ±1 LSD
ModelCapacity
lbf-inkgf-cmN-cmN-m
DIS-RL101.0~90.01.0~100.010~10000.10~10.00

DIS-RL Digital Torque Screwdriver Dimensions