KTC GEK135-R4E Digital Ratchet Torque Wrench

KTC GEK135-R4E Digital Ratchet Torque Wrench

Standard Features

  • Five programmable torque presets ideal for frequent operations.
  • Selectable units: lbf-in, lbf-ft, kgf-cm, N-m
  • Peak, peak with auto zero reset and Real Time modes
  • High accuracy ±1.5% F.S. both CW and CCW directions
  • The best known, rugged, high quality tools for over 60 years!
  • ISO-6789 Compliant
  • Calibration certificate traceable to NIST and carrying case included

The KTC GEK135-R4E Digital Ratchet Torque Wrench has a forged steel ratchet head and features a unique power sensor in the ergonomic handle. The forged steel ratchet head with positive-lock keeps sockets on the drive. The 36 tooth gear with a double claw ratchet allows smaller movement between clicks. The unique design of the sensor keeps the torque point in the center of your hand. The built-in sensor accurately detects and analyzes the load applied to the grip to enable more precise torque measurement regardless of hand position and skill level of the operator.

Operation Modes

KTC digital torque wrenches measure in peak mode, peak with auto zero reset, and real time. Five programmable torque presets stored in memory enable the user to check frequently used values. The presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of the preset torque value using LED and audible indicators (Presets cannot be set at less than 10% of capacity). Selectable units of lbf-in, lbf-ft, kgf-m, and N-m.

What’s Included?

All wrenches include a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge. All wrenches are sold as a kit and include: wrench, hard plastic carrying case and operation manual. Uses a lithium coin battery, Panasonic CR2354, which is included.

GEK135-R4E Range

Accuracy: ±1.5% F.S ± LSD
ModelCapacity
lbf-inlbf-ftkgf-mN-mDrive
GEK135-R4E28~11952.3~99.50.32~13.763.1~135.01/2"
Specifications
Accuracy±1.5% F.S.
Measuring directionCW and CCW
Measuring unitSelectable lbf-in, lbf-ft, kgf-m, N-m
Data Memory5 (storable Target torque values), 1 (Pass/Fail Mode)
Auto Shut OFFPower automatically turns off after 2 minutes of non-use
BatteryLithium coin battery CR2354
Battery LifeApprox. 2 months (100 usages per day)
Optional Quick Spinner and Spinner/Converters

Quick Spinners and Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.

BE2-Q 1/4″ to 1/4″ Quick Spinner
BE3-Q 3/8″ to 3/8″ Quick Spinner
BE4-Q 1/2″ to 1/2″ Quick Spinner

Spinner/Converters have a lower profile than conventional adapters.

BAE23 converts 1/4″ to 3/8″ drive
BAE34 converts 3/8″ to 1/2″ drive

Optional Protective Cover

Model GEK-A, complies with IPX4, allows operation and protects the wrench from splashes in production environments.

Digital Ratchet Torque Wrench Dimensions