MH2 Motorized Test Stand

High Performance, Program Dial, Motorized Horizontal Test Stand

Standard Features

• Selectable Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with ZT Series gauges)
• Easy-to-use program dial and menu screens control mode, speed, timer, cycles
• Ultra rigid, 0.5 mm deflection at maximum load
• Programmable timer up to 99′ 59.9 sec in 0.1 sec increments
• Conditional Overload Prevention
• Up to 65,535 cycles

MH2 Horizontal Motorized Test Stands use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results.

Precise Increment Mode

MH2 features unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approx. 0.015mm for MH2-110 and 0.05mm for MH2-550 (standard speed, under no load).

Cycle Mode

In cycle mode, automated tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Set start and return speeds independently.

Force Control

Force controlled non-destructive tests are also easy to setup and program. Connect an Imada ZT Series force gauge to the MH2 test stand to enable the following force controlled tests and Conditional Overload Prevention.

Maintain Force Between High/Low Setpoints

Force control keeps appled force between high and low setpoints on the ZT Series force gauge for the preset duration.

Increase Force to High Setpoint and Stop

When applied force reaches the low set point on the ZT Series force gauge, the test stand slows to measuring speed and stops when applied force reaches the high set point on the ZT series gauge.