DI-2M Impact & Continuous Drive Digital Torque Tester

Verify Settings on Pneumatic, Electric, Pulse and Continuous Drive Torque Wrenches and Drivers

Standard Features

• Easy to read LED panel displays torque and number of blows for selected period (0.1 – 9.9 sec)
• Selectable units: lbf-in, lbf-ft, kgf-cm, kgf-m and N-m
• Peak, Real Time and Peak Down measuring modes (selectable)
• Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
• Both clockwise and counterclockwise operation
• USB Virtual COM port (peak or continuous data)
• Runs on internal NiMH batteries (8 hour use)
• AC charger included

DI-2M Additional Features

• Impact Sensitivity Adjustment to closely match manufacturer’s specifications
• High/Low setpoints for both torque and blows enable Go/No Go testing
• Peak Down Minimum helps prevent manual torque wrenches locking up before breakaway is reached

The DI-2M Digital Torque Tester is perfectly suited for on-the-spot calibration of impact drivers and air tools. Calibrate your own air tools and impact wrenches and save down time. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. Virtual RS-232 serial output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It is powered by an internal NiMH battery or the included AC adapter.

The DI-2M features easy-to-use menu screens and buttons to program the unit. Impact Sensitivity Adjustment allows the user to control torque output to more closely match manufacturer’s specifications. High/Low setpoints for both torque and blows give visible and audible alerts to enable Go/No Go testing. A Peak Down Minimum setting ensures that continuous drive tools won’t lock up the unit before breakaway torque is reached.

Operation Modes

Peak, Real Time and Peak Down modes are selectable. Peak mode captures the peak torque achieved during a test. PEAK reading will not change until a higher value is measured. Real Time mode displays the real time transient torque value. Peak down captures the critical first peak value and will not change even if a higher value is subsequently measured.

The DI-2M also provides peak or continuous data for SPC (statistical process control) via the USB Virtual COM port. Click on the link here for torque tester data acquisition software.

What’s Included

Choose from three different remote sensors for the DI-2M, available in ranges up to 360 lbf-ft with 3/8″, 1/2″ or 3/4″ drives. All testers include a 3 Point Certificate traceable to NIST, ISO-17025 Certificates are available at an extra charge. The kit includes the remote sensor, display unit, cable and AC adapter/charger.