DI-3N-1P Digital Torque Tester

Digital Torque Tester for Manual Torque Wrenches
OLD MODEL see DIS-IP Digital Torque Tester for Manual Wrenches

Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lbf-ft. It has an accuracy of ± .5% F.S., ± 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 400 internal memory for peak data recall or RS-232 download for analysis by Imada data acquisition software SW-1S. Do not use with power drivers or impact tools (Ask for DI-1M impact wrench torque tester).

DI-3N-1P Ranges

Accuracy ± 0.5% F.S., ±1 LSD
More Ranges ►
ModelCapacity
DI-3N-1P (Drive Size)lbf-inkgf-cmN-cmN-m
DI-3N-1P5 (1/4")0.30~44.000.30~50.003.0~500.0-
DI-3N-1P50 (3/8")3.0~440.03.0~500.030~5000-
DI-3N-1P200A (1/2")30~180030~2000-3.0~200.00
lbf-inlbf-ftkgf-mN-m
DI-3N-1P200 (1/2")-3.0~145.00.30~20.003.0~200.0
DI-3N-1P500 (3/4")-3.0~362.00.30~50.003.0~500.0
  • Heavy duty metal construction
  • lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
  • Peak, Real Time and Peak Down measuring modes (selectable)
  • Programmable High and low setpoints with GO/NO GO LED indicators
  • Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
  • 400 data memory for recall or for SPC download
  • Both clockwise and counterclockwise operation
  • RS-232 output for SPC capability (peak data only)
  • Runs on internal NiCad batteries (8 hour use)
  • AC adapter/charger included