|Digital Ratchet Wrench Ranges|
GEK Digital Ratchet Torque Wrench
GEK Series Digital Ratchet Torque Wrenches
The GEK Digital Ratchet Torque Wrench has a forged steel ratchet head and features a unique power sensor in the ergonomic handle. The forged steel ratchet head with positive-lock keeps sockets on the drive. The 36 tooth gear with a double claw ratchet allows smaller movement between clicks. The unique design of the sensor keeps the torque point in the center of your hand. The built-in sensor accurately detects and analyzes the load applied to the grip to enable more precise torque measurement regardless of hand position and skill level of the operator.
These torque wrenches measure in peak mode, peak with auto zero reset, and real time. Five programmable torque presets stored in memory enable the user to check frequently used values. The presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of the preset torque value using LED and audible indicators (Presets cannot be set at less than 10% of capacity). Selectable units of lbf-in, lbf-ft, kgf-m, and N-m.
All wrenches include a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge. All wrenches are sold as a kit and include: wrench, hard plastic carrying case and operation manual. Uses a lithium coin battery, Panasonic CR2354, which is included.
|Measuring direction||CW and CCW|
|Measuring unit||Selectable lbf-in, lbf-ft, kgf-m, N-m|
|Data Memory||5 (storable Target torque values), 1 (Pass/Fail Mode)|
|Auto Shut OFF||Power automatically turns off after 2 minutes of non-use|
|Battery||Lithium coin battery CR2354|
|Battery Life||Approx. 2 months (100 usages per day)|
GEK Series Standard Features
- High accuracy ±1.5% F.S. both CW and CCW directions
- The best known, rugged, high quality tools for over 60 years!
- Peak, peak with auto zero reset and Real Time modes
- Five programmable torque presets ideal for frequent operations.
- Pass/Fail mode counts fasteners tightened within programmed High/Low limits, using LED and audible alerts
- Selectable units, lbf-in, lbf-ft, kgf-cm, N-m
- ISO-6789 Compliant
- Calibration certificate traceable to NIST and carrying case included
Optional Quick Spinner and Spinner/Converters
Quick Spinners and Spinner/Converters allow users to quickly rundown the bolt or nut using their fingers before applying torque.
BE2-Q 1/4″ to 1/4″ Quick Spinner
BE3-Q 3/8″ to 3/8″ Quick Spinner
BE4-Q 1/2″ to 1/2″ Quick Spinner
Spinner/Converters have a lower profile than conventional adapters.
BAE23 converts 1/4″ to 3/8″ drive
BAE34 converts 3/8″ to 1/2″ drive
Optional Protective Cover
Model GEK-A, complies with IPX4, allows operation and protects the wrench from splashes in production environments.