HTG2 Digital Torque Gauge

HTG2 Series Digital Torque Gauge
Discontinued: See HTGS Model.

The HTG2 Digital Torque Gauge features a remote torque sensor with a Jacob’s chuck. The Jacob’s chuck can be used to grip a test sample or a wide variety of grips. Test in clockwise or counter-clockwise directions. Selectable measuring units of lbf-in, kgf-cm, or N-cm. Use the real time mode to display torque transients or peak mode to capture the peak torque achieved during a test.

Advanced Features

A large LCD display is easy to read from a distance. The HTG2 digital torque gauge also has a set of 3 indicator lights. The orange, green and red indicator lights can be used in conjunction with the programmable high/low setpoints for pass/fail testing.

Store up to 1,000 values in the unit’s internal memory. These values can be displayed or transmitted to a pc using RS-232 serial output.

The instrument has RS-232C, digimatic and analog outputs. The HTG2 is compatible with Imada’s optional SW-1 Data Acquisition Spreadsheet.

What Comes with the Gauge?

HTG2 digital torque gauges are sold in kits which include the gauge, sensor, six foot sensor cable, and AC adapter/charger. The unit runs on built-in Ni-MH rechargeable batteries. All new gauges include a 3-point calibration certificate traceable to NIST. ISO-17025 certificates are available at an additional charge.

HTG2 Digital Torque Gauge Ranges

ModelCapacity (Resolution)
HTG2-470.00 ozf-in (0.01 ozf-in)5.000 (0.001 kgf-cm)50.00 (0.01 N-cm)
HTG2-1515.00 (0.01 lbf-in)20.00 (0.01 kgf-cm)200.0 (0.1 N-cm)
HTG2-4040.00 (0.01 lbf-in)50.00 (0.01 kgf-cm)500.0 (0.1 N-cm)
HTG2-8585.0 (0.1 lbf-in)100.0 (0.1 kgf-cm)1000 (1 N-cm)

HTG2 Standard Features

  • Programmable high/low setpoints with color-coded LED indicators and output signal for quick go/no go testing
  • 1,000 Data memory for computer download
  • lbf-in, kgf-cm, and N-cm units are selectable
  • RS-232C, Digimatic and Analog outputs
  • Runs on internal Ni-MH batteries or AC adapter
  • Ergonomic design with non-slip rubber grip, heavy duty metal construction
  • Both clockwise and counterclockwise operation
  • Overload capacity 200% of F.S.
  • Real time and peak mode (selectable)
  • Overload indicator and output signal
  • Low battery indicator
  • 6.5mm Jacobs Chuck (4mm for HTG2-4)(13mm Chuck available)