KTC GLK060E Digital Torque Screwdriver RangeAccuracy ± 1.5% F.S., ±1 LSD
60 cN-m Capacity
KTC GLK Digital Torque Screwdrivers are compact, lightweight, and feature, LED and audible alarms, ergonomic handle, push button controls, and are battery powered.
KTC digital torque screwdrivers measure torque in peak or real time modes. Auto zero mode resets peak measurements automatically (1~10 seconds). Selectable units of ozf-in, lbf-in, and cN-m.
Five programmable torque presets stored in memory enable the user to check frequently used values. The presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of the preset torque value using LED and audible indicators which enable users to tighten to within 10% of a preset torque value.
Pass/Fail mode counts the number of fasteners tightened within programmed high and low torque limits.
Optional ratchet (RA2) with 1/4″ square drive, CW, CCW and fixed operation is available
For higher accuracy and data ouput, see DID-4 digital torque screwdrivers.
|Measuring direction||CW with display facing you, CCW with display facing away from you|
|Measuring unit||Selectable lbf-in, lbf-ft, kgf-m, N-m|
|Data Memory||5 (storable Target torque values), 1 (Pass/Fail Mode)|
|Auto Shut OFF||Power automatically turns off after 2 minutes of non-use|
|Battery||Lithium coin battery CR2354|
|Battery Life||Approx. 2 months (100 usages per day)|