ZTA-DPU-110 Digital Force Gauge with Remote Sensor

110 lbf, 50 kgf, 500 N Capacity

DPU Standard sensors (compression/tension)

Standard Features

  • OLED electro luminescent display with user friendly menus in eight languages
  • 30,000/sec ultra-high sampling rate; processes and transmits 2,000 data/sec
  • Export gauge memory or save continuous data to USB flash drives
  • Color-Coded LED indicators and output signal for Go/No Go testing
  • Both Push and Pull Capability
  • Selectable lbf, kgf, and N units (ozf, gf measured in low capacity models)
  • 1,000 data memory for recall or download
  • USB (virtual COM port), RS-232C, Digimatic and analog outputs
  • Ergonomic design with non-slip grips, heavy duty metal construction
  • 200% Overload capacity (overload indicator flashes beyond 108% FS)
  • Real time and peak mode (selectable)
  • Kit includes, full set of attachments, DPU sensor with 6′ cable, ZT Logger data acquisition software, USB cable, AC adapter/charger, calibration cert traceable to NIST and carrying case.

The ZTA-DPU-110 digital force gauge with remote sensor offers the same features as the ZTS or ZTA force gauges and is ideal for measurements in confined or difficult to reach locations. All standard DPU sensors come with a six foot cable and measure both compression and tension.

Easy-to-use menus make programming simple in eight languages. Select units, reverse display, set high/low setpoints, and all other functions in plain language.

Electroluminescent OLED display shows force value, unit, and peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, displacement value (using Imada test stand with FA option), etc.

Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights for less than low setpoint, green lights between high and low, and red for over the high.

Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second.

Save data to USB flash drives. Export peak data or capture continuous data at 100 data/second to flash drives with ZTA-DPU force gauges.

ZT Logger data acquisition software downloads data from the gauge memory or captures a continuous stream of data at 10 data/second. Zero the gauge or capture data while at the computer. All gauge programming can be set and saved from the software.

Many other types and dimensions of remote sensor are available. Please inquire.

ZTA-DPU-110 Range (Resolution)

Shaft Size: See dimensions page
ZTA-DPU Ranges (Resolution) - Accuracy: ±0.2% F.S. ±1 LSD
ModelCapacity (Resolution)
PoundsKilogramsNewtons
ZTA-DPU-110110.0 (0.1 lbf)50.00 (0.01 kgf)500.0 (0.1 N)

ZTS-DPU/ZTA-DPU Specifications

Accuracy± 0.2% F.S., ± 1 LSD
Selectable Units
lbf(ozf), kgf(gf) or Newtons
Overload Capacity200% of F.S. (Overload indicator flashes beyond 110% of F.S.)
PowerRechargeable Ni-MH battery pack or AC adapter
Battery IndicatorIndicates three charge states high, med and low
MemoryNon-volatile, recall up to 1,000 data
SetpointsProgrammable high/low setpoints w/ color-coded LEDs & output signal
OutputsOutputs USB (virtual COM port), RS-232C, Digimatic and ± 2 VDC analog output
Operating Temp.Operating Temp. 32° to 100°F (0° to 40°C)
  • Display force and displacement data with Imada FA test stand
  • Export gauge memory or save continuous data to USB flash drives

ZTA-DPU Digital Force Gauge with Remote Sensor Dimensions