(Optional Distance Meter Available, Please Inquire)
The EMX-275 Motorized Force Measurement Test Stand is for users requiring the utmost precision in their force testing. The EMX-275 uses a precision stepper motor that provides precise movement and smooth operation. Rigid construction assures minimum deflection to ensure consistent force and distance test results. The test stand incorporates an easy to read LCD screen onto the base. Use the intuitive program dial to set the mode, speed, test duration time, number of cycles and change other available test settings. The EMX-275 allows users to save up to 5 test configurations into the stand.
The EMX-275 motorized test stand includes three modes of operation: Jog, Manual, Cycle Mode. The EMX-275 features unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approximately .01mm. Manual mode allows the user to control the crosshead using the arrow buttons. In cycle mode, automated cycle tests are easy to setup. Control start, measuring and return speeds independently.
Force controlled non-destructive tests are also easy to setup and program. Connect an Imada ZT Series force gauge to the EMX-275 test stand to enable the use of two force controlled modes and Conditional Overload Prevention. For more information, see the force control operation tab below.
The EMX-275 has been updated and now allows for Distance Control utilizing the new touch sensing feature. This is ideal for for spring tests, elongation tests or any tests requiring a sample to be put under tension or compression to a specified distance.
| Model | Capacity | Distance Meter | Stroke | Speed Range |
| EMX-275 | 275 lbf | None | 315 mm (12.4") | .5 - 600 mm/min (.01 - 23.5 in/min) |
| EMX-275-S | 275 lbf | Standard | 315 mm (12.4") | .5 - 600 mm/min (.01 - 23.5 in/min) |
| EMX-275-FA | 275 lbf | High Speed | 315 mm (12.4") | .5 - 600 mm/min (.01 - 23.5 in/min) |
| Display | Push button for inch/mm, zero set and on/off |
| Resolution | 0.0005"/0.01 mm |
| Accuracy | 0.1% of reading or 0.005"/0.1 mm whichever is greater |
| Range | 280.00 mm | 11.00" |
| Resolution | 0.01 mm | 0.0001" |
| Accuracy | 0.1 mm | 0.004" |
Maintain Force Between High/Low Setpoints
Initial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the ZT series force gauge. The cross head maintains force between the low and high setpoint for the specified hold time,and then returns to the start position.
Increase Force to High Setpoint and Stop
Initial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the ZT series force gauge, the test stand engages the measuring speed setting. The gauge stops when the applied force reaches the high set point on the ZT series force gauge. Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached.
