DI-12-SL15 Breakaway Torque Tester

3.0 – 130.0 lbf-in, 3.0 – 150.0 kgf-cm, 0.30 – 15.00 mN-m/N-m Capacity

0.7 Approx. RPM

1/4″ square Drive

Automatic Breakaway Torque Tester

Standard Features

  • Selectable units: lbf-in, kgf-cm, N-m units available
  • Breakaway, Peak and Real Time measuring modes (selectable)
  • USB virtual COM port sends 80 data/second or peak data
  • Both CW and CCW operation

The Importance of Torque Auditing
Controlling the tightening torque on fasteners (bolts and screws) being tightened by impact and non-impact power tools is challenging. Power tools provide dynamic torque that can vary depending on many variables, such as joint material types, joint layer thicknesses, temperature, the presence of lubricants, etc. As a result, “applied torque” does not equate to “actual tightening torque.“ For this reason, auditing the actual tightening torque is critical.

The most common torque auditing method is breakaway testing. This process involves applying additional torque to a tightened fastener to detect actual tightened torque as the fastener starts moving. This assumes (theoretically) that torque values dip down briefly before climbing to higher than original tightened torque. However, auditing fasteners made of plastic or small-size screws is often challenging, as standard breakaway testing will not always show a clear dip in torque. Additionally, performing a good breakaway test requires a skilled operator and many hours of training and experience.

Using a Cedar DI-12 motorized auto-detect breakaway torque tester, operators achieve a more reliable and consistent breakaway torque measurement, even in the case of small or plastic fasteners. The DI-12 also can be used to detect the yield torque value of a specific joint, to help establish an ideal tightening torque value by testing—not by commonly used calculation methods. It’s easy to use and provides rapid, reliable testing for actual tightening torque.

Operation Modes

The tester features three measurement modes: TR, PP and PD. TR displays real time torque values. PP Displays peak torque values. PD determines breakaway and yield torque (CW only). If breakaway torque value is detected, the green indicator will light, and tester rotation will stop automatically. The DI-12 outputs torque data continuously (in PD mode) to data acquisition software via the USB virtual COM port, enabling the display of breakaway torque profiles.

What’s Included?

All testers come with a 3-Point Certificate traceable to NIST. ISO-17025 Certificates are available at an additional charge. All testers are sold in a complete kit with tester, hard plastic carrying case, and AC adapter/charger. The Cedar DI-12  can run on internal rechargeable batteries or the AC adapter/charger.

 

DI-12-SL15 Ranges (Resolution)

Accuracy: ±1% F.S., 1LSD
ModelCapacityApprox. RPMDrive
ozf-in/lbf-inkgf-cmmN-m/N-m
DI-12-SL153.0 – 130.0 lbf-in3.0 – 150.00.30 - 15.00 N-m0.71/4" square

DI-12-SL Specifications

Display4 digit LCD display
OperationBoth CW and CCW motorized rotation
Measurement ModesPP: Displays PEAK Torque value that will not change until a higher value is measured.
TR: Displays TRANSIENT torque values.
PD: Determines breakaway and yield torque (CW only) If a breakaway torque value is detected, the green indicator will light, and tester rotation will stop automatically.
OutputVirtual RS-232 (9600 bps): PP 1 peak data, PD 80 data/sec.
Auto-power-offAfter 5 minutes of non-use.
DimensionsDetector: 44mm diameter × 190mm length, 1/4" hex drive Indicator: 87mm W × 108mm D × 33mm H

DI-12 Breakaway Torque Tester Dimensions