DIS-IPS20C Digital Torque Tester for Manual Wrenches

Model: DIS-IPS20C with Miniature Remote Sensor

Standard Features

• Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep
• Peak, Real Time and Peak Down measuring modes (selectable)
• Selectable units lbf-in, kgf-cm, or N-m
• USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
• Statistics: number of data, Max, Min, Avg
• 800 data memory for recall or for SPC download
• Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
• Both clockwise and counterclockwise operation
• Heavy duty metal construction
• Runs on internal NiMH batteries (8 hour use)
• AC adapter/charger included

The Cedar DIS-IPS20C Digital Torque Tester Digital Torque Tester is ideal for quickly checking click type, dial and digital torque wrenches up to 3174 lbf-in. It has an accuracy of ± 0.5% F.S., ± 1 LSD. Select Peak, Real Time, Continuous or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint.

Calibrate your own torque wrenches and electric drivers and and save down time. DIS-IPS20C miniature sensor is ideal for permanent installations. Do not use with power drivers or impact tools (Ask for DI-1M impact wrench torque tester).

SPC Capable

The tester features a USB virtual COM port to use with Imada’s specialized SW-1SV-USB Torque Data Acquisition Spreadsheet. Users can utilize the 800 peak data internal memory to analyze test data at a later time. Users can also transmit data in real time. Continuous mode outputs at 12 or 180 data per second.

What’s Included

Cedar DIS-IPS20C models are sold as kits. All kits include display, sensor, sensor cable and AC adapter/charger. The unit runs on internal rechargeable batteries. All new testers include a 3-point calibration certificate traceable to NIST. ISO-17025 certificates are available at an additional charge.