RGED030-R2Z Wireless Digital Ratchet Torque Wrench RangesAccuracy: ±1.5% F.S. ±1 LSD
265 lbf-in Capacities
The RGED030-R2Z Wireless Digital Ratchet Torque Wrench transmits peak data up to 130 feet to the included Torque Management software. A single wireless receiver supports up to ten wireless ratchet or adjustable wrenches. Wrenches store up to 200 data when out of range. When back in range, turn the power off then on to upload stored data to the software. Torque Management software keeps a log of all measurements which can be exported in CSV format.
The wrenches are built with forged steel ratchet heads, positive-lock drives and a 36 tooth gear with double claw ratchets which allows smaller movements between clicks. The unique power sensor in the ergonomic handle accurately detects and analyzes load applied to the grip to enable precise torque measurement.
Wrenches measure in peak mode, peak with auto zero reset, and real time. Five programmable Go/No Go torque presets stored in memory enable users to check frequently used values. Presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of preset torque using LED and audible indicators (Presets cannot be set at less than 10% of capacity). Selectable lbf-in, lbf-ft, kgf-m, and N-m units. Uses a lithium ion Panasonic CR123A battery. Wireless receiver, GED-Z is included.
|Measuring direction||CW and CCW|
|Measuring unit||Selectable lbf-in, lbf-ft, kgf-m, N-m|
|Data Memory||5 (storable Target torque values), 1 (Pass/Fail Mode)|
|Auto Shut OFF||Power automatically turns off after 2 minutes of non-use|
|Battery||Lithium coin battery CR123A|
|Battery Life||Approx. 2 months (100 usages per day)|